• The most effective way to specify dimensions is to list them in order of height, width, and depth followed by the unit of measurement. For example, 60 x 48 x 2 inches (152.4 x 121.9 cm).This format is understood by collectors, galleries, architects, and manufacturers and allows the reader to quickly determine if the artwork is vertical, horizontal, or square. Using a format that only includes "48 x 60 inches" can be confusing, as it leaves open the question of which measurement is height.If the artwork is two-dimensional, list it as height x width. If there are additional features such as a stretcher, frame, or decorative elements, include the depth. For textile artwork mounted on a support without a frame, the depth should reflect the final installation, not just the thickness of the material.For a catalogue intended for American collectors, it is recommended to start with the dimensions in inches and provide the metric equivalent in parentheses. This approach is aligned with the way most American interiors are measured and makes the work accessible to international clients, architects, and institutions.It is important to use precise conversions rather than general approximations, as even a difference of half an inch can be significant when it comes to millwork or within a hospitality installation. It is also crucial to clearly state what the measurement encompasses, as the key question is "How big is the finished work the collector will receive?" A detailed listing will provide a clear answer and avoid leaving the buyer guessing what has been included.For a framed artwork, it's important to distinguish between the area of the image and the overall size of the frame. The collector might be interested in the visual aspect, while the designer and installer need to take into account the external measurements. A clear description could read: "Artwork: 40 x 30 inches. Framed dimensions: 44 x 34 x 2 inches."For a silk tapestry, it's essential to specify the dimensions of the completed textile and clarify the mounting method, if necessary. If the work includes a border, hand-finished edges, or a hanging structure, these should be included in the overall measurements. They're part of the intended composition and physical size.When it comes to a textile sculpture, measuring the finished piece is crucial, not the studio component. If you're planning to display it in a hallway or over a console, make sure to take this into consideration before it arrives.A common source of confusion when it comes to measuring artwork is when it is not yet fully realized. The dimensions of the canvas, silk panel, embroidery, or internal structure may be one size in the studio, but the final collectible may be a different size.It is only after all permanent elements, such as the frame, mounting, stretching, backing, and intended hanging system, have been installed, that the work can be measured accurately. If the artwork is made to order, its dimensions may vary slightly due to the handmade nature of the process. In this case, it is important to clearly state the intended dimensions and explain the tolerance, for example: "Approximately 72 x 48 inches, with slight variation inherent to handmade textile construction."This qualification should be used carefully, not as a replacement for accurate measurement. Handcrafted does not mean imprecise. It means that the artwork deserves a dimension that is both accurate where possible and honest where material variation creates subtle differences.The silk, in particular, is a fabric that benefits from this attention. Its surface can display a remarkable play of light, and its drape and edges may subtly respond to gravity, tension, and environmental factors. The measurements provided should reflect the work as it will be displayed. If the textile has a deliberate movement or a soft texture, a brief description can help the viewer prepare for the nature of the piece without sacrificing accuracy.